Maker states: "Hand-built in Arizona" and "ReGen builds premium USA-made cold plunge systems"
- Power120 V, 7 A max draw, GFCI outlet (maker)
- BaseLevel and solid: concrete, pavers or a framed deck checked for the load
- Warranty: 2 years included; 3 or 4 years optional
- Standard tub
- 67 x 33 x 27 in, 75 gal, fits up to 6 ft 0 in (maker)
- X-Large tub
- 73 x 33 x 27 in, 95 gal, fits over 6 ft (maker)
- Chiller
- 1/4 HP (to 39 F) or 1/2 HP (to 36 F)
Will it work at your place?
The questions that decide whether this goes smoothly: power, base, space, delivery and permits. Answered here, before you order.
Read: Cold plunge gfci electrical requirements- Electrical work and permit
- Foundation or base
- Assembly labor, unless the maker offers it
What happens after you order.
- STEP 1PlanWe confirm power, base and access with you before you order.
- STEP 2OrderYou order directly from ReGen Total Wellness on their site, and pay them.
- STEP 3ShipsReGen Total Wellness ships to your address in the contiguous US.
- STEP 4AssembleSet it on the prepared base, following the maker's manual.
- STEP 5Fill, power up and plungeYour electrician makes the connection the maker specifies, then you are ready for the first session.
Specifications
| Standard tub | 67 x 33 x 27 in, 75 gal, fits up to 6 ft 0 in (maker) |
|---|---|
| X-Large tub | 73 x 33 x 27 in, 95 gal, fits over 6 ft (maker) |
| Chiller | 1/4 HP (to 39 F) or 1/2 HP (to 36 F) |
| Power | 120 V, 7 A max draw, GFCI outlet (maker) |
| Dry weight | 200 lb (maker) |
| Position | Lay down |
| Included | Lockable insulated cover, filter cartridge, skimmer net |
| Warranty | 2 years included; 3 or 4 years optional |
From ReGen Total Wellness's published product page. Confirm against the current spec sheet before you build a pad or pull wire. Maker's product page
Configurations
| Standard, 1/4 HP chiller | $4,990 |
|---|---|
| Standard, 1/2 HP chiller | $5,740 |
| X-Large, 1/4 HP chiller | $5,490 |
| X-Large, 1/2 HP chiller | $6,240 |
About this cold plunge
The OG is ReGen Total Wellness's original lay-down plunge tub, hand-built in Arizona. It starts at $4,990 at the maker for the standard tub with a 1/4 HP chiller and runs to $6,240 for the X-Large with a 1/2 HP chiller, before extended warranty options.
It plugs into a 120 volt GFCI outlet, needs no special plumbing, and comes with a lockable insulated cover. The 1/2 HP chiller takes water down to 36 degrees; ReGen lists that chiller as Japanese built.
- From $4,990 at the maker
- Standard or X-Large
- Down to 36 F with 1/2 HP
- Hand-built in Arizona (maker)
Warranty and shipping
Questions people ask before buying
Standard or X-Large?
ReGen sizes the standard tub for people up to 6 feet tall and the X-Large for anyone taller. The X-Large holds 95 gallons versus 75.
1/4 HP or 1/2 HP chiller?
The 1/4 HP chiller reaches 39 degrees; the 1/2 HP reaches 36 and cools faster. Our chiller size guide explains when the bigger unit is worth it.
Where is the chiller made?
ReGen builds its tubs in Arizona and lists the chiller as Japanese built. We quote both so you know what you are buying.
Can I order it through Brevley & Sons?
Not directly yet. Use the maker link for current pricing and lead time, or ask us about sizing, power and placement.
Who do I order from, and who handles warranty?
You order directly from ReGen Total Wellness, and warranty claims go to ReGen Total Wellness. We help you plan before you order and are here if questions come up after.
Compare with similar cold plunges
See all cold plunges
Get expert help with this cold plunge
Tell us about your space and power, and we will reply with honest advice on sizing, install and whether this is the right model. No obligation.
Not sure this is the one?
Tell us about your space, your power and your weather. We'll tell you plainly whether this fits, and what would fit better if it doesn't.
Product names and trademarks belong to ReGen Total Wellness. Specifications and prices are summarized from the maker's public site.