Maker states: "Therasauna full spectrum far infrared saunas are made in the U.S.A."
- Power120 V / 15 A outlet
- Space49 x 45 x 78 in (maker)
- BaseLevel and solid: concrete, pavers or a framed deck checked for the load
- Size
- 49 x 45 x 78 in (maker)
- Wood
- Aspen hardwood
- Heaters
- 8 solid ceramic TheraMitter heaters
Will it work at your place?
The questions that decide whether this goes smoothly: power, base, space, delivery and permits. Answered here, before you order.
Read: Infrared vs traditional sauna pacific northwest- Electrical work and permit
- Foundation or base
- Assembly labor, unless the maker offers it
What happens after you order.
- STEP 1PlanWe confirm power, base and access with you before you order.
- STEP 2OrderYou order directly from TheraSauna on their site, and pay them.
- STEP 3ShipsTheraSauna ships to your address in the contiguous US.
- STEP 4AssembleSet it on the prepared base, following the maker's manual.
- STEP 5Hook up and heatYour electrician makes the connection the maker specifies, then you are ready for the first session.
Specifications
| Seats | 1 (maker), straight bench |
|---|---|
| Size | 49 x 45 x 78 in (maker) |
| Wood | Aspen hardwood |
| Heaters | 8 solid ceramic TheraMitter heaters |
| Power | 120 V / 15 A outlet |
| Windows | Smoke glass door and 2 side windows |
| Controls | 4 button LCD control |
| Lighting | 7 external LED roof lights, sconce light |
| Certification | Meets or exceeds ETL and CE safety requirements (maker) |
From TheraSauna's published product page. Confirm against the current spec sheet before you build a pad or pull wire. Maker's product page
About this sauna
The TheraSauna TS4746 is a 1 person far infrared sauna built from aspen hardwood by QCA Spas, which has been in business since 1966. It sells for $3,831.95 at the maker.
It measures 49 x 45 x 78 in and runs 8 solid ceramic heaters from a 120 V / 15 A household outlet, so no hardwired 240 volt circuit is needed. A roof vent, LED roof lights and a sconce light come standard.
- $3,831.95 at the maker
- Seats 1
- Plugs into a 120 V / 15 A outlet
- Made in the U.S.A. (maker)
Questions people ask before buying
What outlet does it need?
TheraSauna lists a 120 V / 15 A outlet for this model. A dedicated circuit is wise so the sauna does not share a breaker with other loads.
What wood is it made of?
TheraSauna builds its cabins from aspen hardwood, which it describes as non-toxic and non-allergenic.
Infrared or traditional sauna?
Infrared heats you directly at lower air temperatures and plugs into a household outlet; a traditional sauna heats the air and stones and usually needs a 240 volt circuit. Our comparison guide covers the tradeoffs.
Can I order it through Brevley & Sons?
Not directly yet. Use the maker link for current pricing and lead time, or ask us about sizing, power and placement.
Who do I order from, and who handles warranty?
You order directly from TheraSauna, and warranty claims go to TheraSauna. We help you plan before you order and are here if questions come up after.
Get expert help with this infrared sauna
Tell us about your space and power, and we will reply with honest advice on sizing, install and whether this is the right model. No obligation.
Not sure this is the one?
Tell us about your space, your power and your weather. We'll tell you plainly whether this fits, and what would fit better if it doesn't.
Product names and trademarks belong to TheraSauna. Specifications and prices are summarized from the maker's public site.