Maker states: "Handcrafted in the USA"
- Power240V 30A NEMA L14-30 (standard) or 240V 50A NEMA 14-50 (XL)
- BaseLevel and solid: concrete, pavers or a framed deck checked for the load
- Warranty: 2 years
- Wood
- Cedar, weatherproof
- Sizes
- Standard H 7 ft 11 in x W 5 ft 8 in x D 5 ft 11 in; XL W 7 ft 8 in
- Heater
- HUUM stone heater, to 230°F
Will it work at your place?
The questions that decide whether this goes smoothly: power, base, space, delivery and permits. Answered here, before you order.
Read: Sauna heater breaker wire size- Electrical work and permit
- Foundation or base
- Assembly labor, unless the maker offers it
What happens after you order.
- STEP 1PlanWe confirm power, base and access with you before you order.
- STEP 2OrderYou order directly from Plunge on their site, and pay them.
- STEP 3ShipsPlunge ships to your address in the contiguous US.
- STEP 4AssembleSet it on the prepared base, following the maker's manual.
- STEP 5Hook up and heatYour electrician makes the connection the maker specifies, then you are ready for the first session.
Specifications
| Wood | Cedar, weatherproof |
|---|---|
| Sizes | Standard H 7 ft 11 in x W 5 ft 8 in x D 5 ft 11 in; XL W 7 ft 8 in |
| Heater | HUUM stone heater, to 230°F |
| Power | 240V 30A NEMA L14-30 (standard) or 240V 50A NEMA 14-50 (XL) |
| Foundation | Must support 1,400 lb; 4 in concrete pad or reinforced deck |
| Warranty | 2 years |
From Plunge's published product page. Confirm against the current spec sheet before you build a pad or pull wire. Maker's product page
Configurations
| Standard | $12,990 |
|---|---|
| XL | $13,990 |
About this sauna
The Plunge Plunge Sauna is an outdoor barrel sauna listed at $12,990 to $13,990 on the maker's site, checked October 24, 2026. It is Plunge's traditional outdoor sauna in cedar, with a HUUM heater that reaches up to 230°F.
The XL version is two feet wider. Both use a plug-in cord on a 240V twist-lock or 14-50 receptacle, which an electrician installs.
- Cedar, to 230°F
- HUUM stone heater
- Standard or XL
- 240V 30A or 50A
- Maker states: "Handcrafted in the USA"
Warranty and shipping
Questions people ask before buying
What foundation does it need?
Plunge says the surface must support up to 1,400 pounds: a level concrete pad at least 4 inches thick, or a treated lumber deck reinforced for that load.
Where is Plunge made?
Plunge's product pages say its traditional cedar saunas are handcrafted in the USA. Its cold plunge pages do not state a country of origin, so we do not list one for them.
Can I order it through Brevley & Sons?
Not directly. The button takes you to the maker, who sells and ships it. We help with sizing, power and placement questions at no charge.
Who do I order from, and who handles warranty?
You order directly from Plunge, and warranty claims go to Plunge. We help you plan before you order and are here if questions come up after.
Get expert help with this outdoor barrel sauna
Tell us about your space and power, and we will reply with honest advice on sizing, install and whether this is the right model. No obligation.
Not sure this is the one?
Tell us about your space, your power and your weather. We'll tell you plainly whether this fits, and what would fit better if it doesn't.
Product names and trademarks belong to Plunge. Specifications and prices are summarized from the maker's public site.