Maker states: "Built in Arizona - crafted by the same team behind the industry's toughest cold plunge systems"
- Power220 V, professional installation required (maker)
- BaseLevel and solid: concrete, pavers or a framed deck checked for the load
- Warranty: 1 year included; extended options
- Design
- Modeled on the Blast cold tub frame, upright seating
- Filtration
- 50 sq ft filter (maker)
- Heating
- Commercial-grade heating system (maker)
Will it work at your place?
The questions that decide whether this goes smoothly: power, base, space, delivery and permits. Answered here, before you order.
Read: Hot tub 120v plug and play vs 240v- Electrical work and permit
- Foundation or base
- Assembly labor, unless the maker offers it
What happens after you order.
- STEP 1PlanWe confirm power, base and access with you before you order.
- STEP 2OrderYou order directly from ReGen Total Wellness on their site, and pay them.
- STEP 3ShipsReGen Total Wellness ships to your address in the contiguous US.
- STEP 4AssembleSet it on the prepared base, following the maker's manual.
- STEP 5Fill, power up and soakYour electrician makes the connection the maker specifies, then you are ready for the first session.
Specifications
| Design | Modeled on the Blast cold tub frame, upright seating |
|---|---|
| Filtration | 50 sq ft filter (maker) |
| Heating | Commercial-grade heating system (maker) |
| Power | 220 V, professional installation required (maker) |
| Use | Indoor or outdoor |
| Warranty | 1 year included; extended options |
From ReGen Total Wellness's published product page. Confirm against the current spec sheet before you build a pad or pull wire. Maker's product page
Configurations
| Residential, 1 year warranty | $5,990 |
|---|---|
| Commercial use | $6,490 |
About this hot tub
The ReGen Heat is a compact hot tub built on the frame of ReGen's Blast cold tub, with deep upright seating for full-body soaking. It sells for $5,990 at the maker, or $6,490 for commercial use.
ReGen calls it a true hot tub rather than a plunge with hot water, with a 50 square foot filter of the size used on a 4 to 6 person spa and modular parts that are easy to service. It needs a 220 volt circuit.
- $5,990 at the maker
- Compact soaking tub
- 50 sq ft filter
- Built in Arizona (maker)
Warranty and shipping
Questions people ask before buying
Can I pair it with a ReGen cold plunge?
ReGen says the Heat is modeled after the structure of its Blast cold tub, so the two make a matched hot and cold pair. Ask ReGen about placing them side by side.
Does it need 240 volts?
ReGen lists a standard 220 volt setup with professional installation. Our 120 volt versus 240 volt guide explains the wiring.
Can I order it through Brevley & Sons?
Not directly yet. Use the maker link for current pricing and lead time, or ask us about sizing, power and placement.
Who do I order from, and who handles warranty?
You order directly from ReGen Total Wellness, and warranty claims go to ReGen Total Wellness. We help you plan before you order and are here if questions come up after.
Get expert help with this hot tub
Tell us about your space and power, and we will reply with honest advice on sizing, install and whether this is the right model. No obligation.
Not sure this is the one?
Tell us about your space, your power and your weather. We'll tell you plainly whether this fits, and what would fit better if it doesn't.
Product names and trademarks belong to ReGen Total Wellness. Specifications and prices are summarized from the maker's public site.