Fabricated in Miami, Florida, per maker
- Power110V, 450W, 4AMP Power Cord 10' Power Cord w/ GFCI Hose
- Space40" (L) x 53" (W) x 37" (H)
- BaseLevel and solid: concrete, pavers or a framed deck checked for the load
- Footprint with chiller
- 40" (L) x 53" (W) x 37" (H)
- Tub size
- 37" (D) x 37" (H)
- Interior size
- 31" (D) x 37" (H) Step Size 16" Two Step
Will it work at your place?
The questions that decide whether this goes smoothly: power, base, space, delivery and permits. Answered here, before you order.
Read: Cold plunge gfci electrical requirements- Electrical work and permit
- Foundation or base
- Assembly labor, unless the maker offers it
What happens after you order.
- STEP 1PlanWe confirm power, base and access with you before you order.
- STEP 2OrderYou order directly from The Cold Life on their site, and pay them.
- STEP 3ShipsThe Cold Life ships to your address in the contiguous US.
- STEP 4AssembleSet it on the prepared base, following the maker's manual.
- STEP 5Fill, power up and plungeYour electrician makes the connection the maker specifies, then you are ready for the first session.
Specifications
| Seats | 90 Gallons Weather |
|---|---|
| Footprint with chiller | 40" (L) x 53" (W) x 37" (H) |
| Tub size | 37" (D) x 37" (H) |
| Interior size | 31" (D) x 37" (H) Step Size 16" Two Step |
| Dry weight | 26lbs Ultimate Lite |
| Filled weight | 850lbs (aprox w/ Chiller) Plunge |
| Power | 110V, 450W, 4AMP Power Cord 10' Power Cord w/ GFCI Hose |
| Cooling | 3/4HP, 7500 BTU Temp. 37° Pump Xtreme Power Pump Filter 150 Micron Re-Usable Net |
| Fits users up to | 6'5 |
| Filter | 150 Micron Re-Usable |
From The Cold Life's published product page. Confirm against the current spec sheet before you build a pad or pull wire. Maker's product page
Configurations
| Cold | $4,799 |
|---|---|
| Cold + Hot | $5,499 |
About this cold plunge
The The Cold Life Ultimate Lite is a complete cold plunge. The maker prices it from $4,799 to $5,499.
A purpose-built plunge is mostly about insulation and water care. A well insulated tub with a lid holds temperature on a small chiller, and good filtration means fewer full water changes.
- Cooling: 3/4HP, 7500 BTU Temp. 37° Pump Xtreme Power Pump Filter 150 Micron Re-Usable Net
- Power: 110V, 450W, 4AMP Power Cord 10' Power Cord w/ GFCI Hose
- Fits users up to: 6'5
- Filled weight: 850lbs (aprox w/ Chiller) Plunge
- Fabricated in Miami, Florida, per maker
Questions people ask before buying
Does it plug into a normal outlet?
The maker lists power as 110V, 450W, 4AMP Power Cord 10' Power Cord w/ GFCI Hose. Use a dedicated GFCI outlet where possible and confirm the exact requirement in the manual.
How cold will it get?
Real results depend on room temperature, lid use and how often you plunge.
Can I order it through Brevley & Sons?
Not directly yet. Use the maker link for current pricing and lead time, or ask us to help size a system for your space and climate.
Who do I order from, and who handles warranty?
You order directly from The Cold Life, and warranty claims go to The Cold Life. We help you plan before you order and are here if questions come up after.
Get expert help with this cold plunge
Tell us about your space and power, and we will reply with honest advice on sizing, install and whether this is the right model. No obligation.
Not sure this is the one?
Tell us about your space, your power and your weather. We'll tell you plainly whether this fits, and what would fit better if it doesn't.
Product names and trademarks belong to The Cold Life. Specifications and prices are summarized from the maker's public site.