Photos: Plunge. See Plunge's product page for more.

Plunge

Plunge Pop-Up Ice Bath

Name: Plunge Plunge Pop-Up Ice Bath
Brand: Plunge

Cold plunge

$4,490

Maker's listed price, checked October 24, 2026. Taxes and freight are set by the maker.

Range $4,490 to $4,990 across 2 configurations.

Configuration

Buy from Plunge ↗ Talk to us before you buy

You order directly from Plunge; Brevley & Sons does not stock or ship this item. We help you plan it before and after. How we work.

Some links on our site are affiliate links and may earn us a commission. Read our disclosure.

Will it work at your place?

Power120V 15A GFCI outlet, dedicated circuit recommended
Space32 in D x 30 in H
BaseLevel and solid: concrete, pavers or a framed deck checked for the load

See the full install checklist

Dimensions: 32 in D x 30 in H
Water capacity: 95 gallons
Power: 120V 15A GFCI outlet, dedicated circuit recommended

Before you buy

Will it work at your place?

The questions that decide whether this goes smoothly: power, base, space, delivery and permits. Answered here, before you order.

Read: Cold plunge gfci electrical requirements

Power

120V 15A GFCI outlet, dedicated circuit recommended

Space

32 in D x 30 in H. Keep the clearances in the maker's manual.

Base

A level, solid base that can carry the weight (About 810 lb): a concrete pad, pavers, or a framed deck checked for the load.

Permits

Electrical work usually needs a permit, and some cities regulate backyard structures. Check with yours first.

Install notes

Plug the chiller into a dedicated, GFCI protected outlet sized to the maker's rating and keep the clearances it lists so the unit can shed heat.

A filled plunge weighs roughly 700 to 1,300 pounds. Indoors, use a slab or a floor checked for the load; outdoors, set it on a level pad and plan where drain water will go.

Not included. Plan for these.

Electrical work and permit
Foundation or base
Assembly labor, unless the maker offers it

From order to first use

What happens after you order.

STEP 1
Plan
We confirm power, base and access with you before you order.
STEP 2
Order
You order directly from Plunge on their site, and pay them.
STEP 3
Ships
Plunge ships to your address in the contiguous US.
STEP 4
Assemble
Set it on the prepared base, following the maker's manual.
STEP 5
Fill, power up and plunge
Your electrician makes the connection the maker specifies, then you are ready for the first session.

Specifications

Dimensions	32 in D x 30 in H
Water capacity	95 gallons
Power	120V 15A GFCI outlet, dedicated circuit recommended
Cooling	1/2 HP, to 39°F
Empty weight	18 lb
Filled weight	About 810 lb
Fits	Up to 6 ft 9 in

From Plunge's published product page. Confirm against the current spec sheet before you build a pad or pull wire. Maker's product page

Configurations

Cold Only	$4,490
Add Heater	$4,990

About this cold plunge

The Plunge Plunge Pop-Up Ice Bath is a cold plunge listed at $4,490 to $4,990 on the maker's site, checked October 24, 2026. The Pop-Up is a portable round barrel-style tub with a 1/2 HP chiller.

At 18 pounds empty it is the lightest Plunge, and it is the easiest to move between seasons.

95 gallons
18 lb empty
1/2 HP, to 39°F
120V 15A

Returns

Returns follow Plunge's policy, since you order from them. How returns work.

Questions people ask before buying

What outlet does it need?

Plunge lists: 120V 15A GFCI outlet, dedicated circuit recommended. A dedicated circuit means nothing else runs on it.

Where is Plunge made?

Plunge's product pages say its traditional cedar saunas are handcrafted in the USA. Its cold plunge pages do not state a country of origin, so we do not list one for them.

Can I order it through Brevley & Sons?

Not directly. The button takes you to the maker, who sells and ships it. We help with sizing, power and placement questions at no charge.

Who do I order from, and who handles warranty?

You order directly from Plunge, and warranty claims go to Plunge. We help you plan before you order and are here if questions come up after.

Field guides