Origin: maker states designed, rotomolded and hand-assembled by Cryospring in Minnesota (Cryospring site); written proof pending
- BaseLevel and solid: concrete, pavers or a framed deck checked for the load
- Seats
- Up to 1 people
- Outside with equipment housing
- 86.75" L x 33.5" W x 35.5" H
- Inside tub
- 53.25" L x 26" W x 27.25" deep
Will it work at your place?
The questions that decide whether this goes smoothly: power, base, space, delivery and permits. Answered here, before you order.
Read: Best american made cold plunges 2026- Foundation or base
- Assembly labor, unless the maker offers it
What happens after you order.
- STEP 1PlanWe confirm power, base and access with you before you order.
- STEP 2OrderYou order directly from Cryospring on their site, and pay them.
- STEP 3ShipsCryospring ships to your address in the contiguous US.
- STEP 4AssembleSet it on the prepared base, following the maker's manual.
- STEP 5Fire it upCheck local burn rules and clearances, then enjoy the first evening.
Specifications
| Outside with equipment housing | 86.75" L x 33.5" W x 35.5" H |
|---|---|
| Inside tub | 53.25" L x 26" W x 27.25" deep |
| Capacity | 150 gallons |
| Insulation | Up to 4.5" closed-cell foam |
| Chiller ports | Molded-in 3/4" NPT in/out |
| Weight | 160 lbs empty, 223 lbs shipped |
| Equipment housing | Drip pan 27" x 22", 24" tall |
| Note | Needs your own chiller, pump and filtration |
From Cryospring's published product page. Confirm against the current spec sheet before you build a pad or pull wire. Maker's product page
About this cold plunge
The Barton Tub Only is the same insulated rotomolded tub and equipment cover as the full Barton, without the chiller, pump or filtration.
It is built for people who already own a chiller or want to pick their own. Cryospring lists it at $2,499 in Limestone White.
- 150 gallon tub
- Up to 4.5" insulation
- Chiller-ready 3/4" ports
- Ventilated equipment cover
Questions people ask before buying
Does it cool water by itself?
No. Cryospring says it needs an all-in-one chiller or a separate chiller, pump and filter to work as an iceless cold plunge.
Where is it made?
Cryospring says it is designed in-house and hand-assembled in Minnesota. We have not yet received written origin proof, so we show no Made in USA badge for now.
Who do I order from, and who handles warranty?
You order directly from Cryospring, and warranty claims go to Cryospring. We help you plan before you order and are here if questions come up after.
Compare with similar cold plunges
See all cold plunges
Get expert help with this cold plunge
Tell us about your space and power, and we will reply with honest advice on sizing, install and whether this is the right model. No obligation.
Not sure this is the one?
Tell us about your space, your power and your weather. We'll tell you plainly whether this fits, and what would fit better if it doesn't.
Product names and trademarks belong to Cryospring. Specifications and prices are summarized from the maker's public site.