Maker states: designed, rotomolded and hand-assembled by Cryospring in Minnesota
- PowerStandard 110V outlet, max 620W / 6.9A, GFCI cord
- BaseLevel and solid: concrete, pavers or a framed deck checked for the load
- Warranty: 1 year, extended options at checkout (maker)
- External size
- 86.75 x 33.5 x 35.5 in (L x W x H)
- Tub interior
- 53.25 x 26 x 27.25 in deep
- Capacity
- 150 gallons max
Will it work at your place?
The questions that decide whether this goes smoothly: power, base, space, delivery and permits. Answered here, before you order.
Read: Cold plunge gfci electrical requirements- Electrical work and permit
- Foundation or base
- Assembly labor, unless the maker offers it
What happens after you order.
- STEP 1PlanWe confirm power, base and access with you before you order.
- STEP 2OrderYou order directly from Cryospring on their site, and pay them.
- STEP 3ShipsCryospring ships to your address in the contiguous US.
- STEP 4AssembleSet it on the prepared base, following the maker's manual.
- STEP 5Fill, power up and plungeYour electrician makes the connection the maker specifies, then you are ready for the first session.
Specifications
| External size | 86.75 x 33.5 x 35.5 in (L x W x H) |
|---|---|
| Tub interior | 53.25 x 26 x 27.25 in deep |
| Capacity | 150 gallons max |
| Weight | 160 lb tub and lid; 285 lb shipped |
| Cooling | 1/2 hp chiller, auto-cools as low as 39°F |
| Circulation | 1,200 gallons per hour, 50 micron filter |
| Sanitation | Ozone, 100 mg/hr |
| Electrical | Standard 110V outlet, max 620W / 6.9A, GFCI cord |
| Shell | Heavy-duty rotomolded, insulated, fully sealing locking child-safety lid |
| Warranty | 1 year, extended options at checkout (maker) |
From Cryospring's published product page. Confirm against the current spec sheet before you build a pad or pull wire. Maker's product page
Configurations
| Limestone White (indoor/outdoor, full sun approved) | $3,999 |
|---|---|
| Obsidian Black (indoor/outdoor, full shade only) | $3,999 |
About this cold plunge
The Cryospring Barton is a 150 gallon rotomolded cold plunge with the chiller, pump, filter and ozone hidden under a ventilated cover. It sells for $3,999 at the maker, in white for full sun or black for shade.
At over 27 inches of inside depth it is one of the roomier tubs at this price, and it runs off a standard 110V outlet at a listed 6.9 amps, so most homes can plug it in without new wiring.
- 150 gallons, 27.25 in inside depth
- Chills as low as 39°F on 110V
- Ozone plus 50 micron filtration
- Built in Minnesota (maker)
Warranty and shipping
Questions people ask before buying
Does it plug into a normal outlet?
Yes. The maker lists a standard 110V outlet with a max draw of 620W / 6.9A and a GFCI cord. Use a dedicated outdoor-rated GFCI receptacle where you can.
Is it made in the USA?
Cryospring says the Barton is designed, rotomolded and hand-assembled in Minnesota, and its feature list says Made in USA. The included chiller is a third-party unit whose origin the maker does not state, so we show the maker's words rather than a badge.
Can I order it through Brevley & Sons?
Not directly yet. Use the maker link for current pricing and lead time, or ask us about sizing, power and placement.
Who do I order from, and who handles warranty?
You order directly from Cryospring, and warranty claims go to Cryospring. We help you plan before you order and are here if questions come up after.
Get expert help with this cold plunge
Tell us about your space and power, and we will reply with honest advice on sizing, install and whether this is the right model. No obligation.
Not sure this is the one?
Tell us about your space, your power and your weather. We'll tell you plainly whether this fits, and what would fit better if it doesn't.
Product names and trademarks belong to Cryospring. Specifications and prices are summarized from the maker's public site.