Maker states: "DreamMaker spas are designed and assembled in the USA, in our own factory located in the Innovation Center in Lake Mary, Florida."
- Power120V 15 amp plug and play (maker)
- BaseLevel and solid: concrete, pavers or a framed deck checked for the load
- Seats
- Up to 5 people
- Jets
- 25 adjustable jets
- Pump
- 3 HPR pump
Will it work at your place?
The questions that decide whether this goes smoothly: power, base, space, delivery and permits. Answered here, before you order.
Read: Hot tub 120v plug and play vs 240v- Electrical work and permit
- Foundation or base
- Assembly labor, unless the maker offers it
What happens after you order.
- STEP 1PlanWe confirm power, base and access with you before you order.
- STEP 2OrderYou order directly from DreamMaker Spas on their site, and pay them.
- STEP 3ShipsDreamMaker Spas ships to your address in the contiguous US.
- STEP 4AssembleSet it on the prepared base, following the maker's manual.
- STEP 5Fill, power up and soakYour electrician makes the connection the maker specifies, then you are ready for the first session.
Specifications
| Seating | 2500S: 5 people; 2500L: 4 people with full-body lounge |
|---|---|
| Jets | 25 adjustable jets |
| Pump | 3 HPR pump |
| Electrical | 120V 15 amp plug and play (maker) |
| Entertainment | Built-in entertainment table and cooler compartment |
| Lighting | Backlit LED fountain, 8 exterior cabinet lights |
| Colors | Seven Syncrylic color combinations (maker) |
From DreamMaker Spas's published product page. Confirm against the current spec sheet before you build a pad or pull wire. Maker's product page
Configurations
| 2500S | $7,699 |
|---|---|
| 2500L with lounge | $7,699 |
| 2500S Suite | $8,799 |
| 2500L Suite | $8,799 |
About this hot tub
The Cabana 2500 is the plug-and-play version of DreamMaker's Cabana spa, with the built-in entertainment table and cooler and 25 adjustable jets on a 3 HPR pump. The 2500S and 2500L sell for $7,699 at the maker, and the Suite versions for $8,799.
It runs from a standard 120 volt, 15 amp outlet, so there is no hardwiring. The 2500S seats five and the 2500L four with a full-body lounge, and the maker lists seven shell and panel color combinations.
- Built-in table and cooler
- 120V plug and play
- 25 adjustable jets
- Suite option
Questions people ask before buying
What do the S and L versions mean?
On DreamMaker's pages the S models are all-seat layouts and the L models trade a seat for a full-body lounger, so the L seats one or two fewer people.
What does the Suite version add?
DreamMaker's Suite spas add wide integrated steps with slip resistant treads, a handrail, two side planters, storage inside the step and a cover lifter, for about $1,100 to $1,200 more than the base spa when we checked.
Where are DreamMaker spas made?
DreamMaker says its spas are designed and assembled in the USA in its own factory in Lake Mary, Florida. We quote that wording and show no Made in USA badge.
Can I order it through Brevley & Sons?
Not directly yet. Use the maker link for current pricing and lead time, or ask us about sizing, power and placement.
Who do I order from, and who handles warranty?
You order directly from DreamMaker Spas, and warranty claims go to DreamMaker Spas. We help you plan before you order and are here if questions come up after.
Get expert help with this hot tub
Tell us about your space and power, and we will reply with honest advice on sizing, install and whether this is the right model. No obligation.
Not sure this is the one?
Tell us about your space, your power and your weather. We'll tell you plainly whether this fits, and what would fit better if it doesn't.
Product names and trademarks belong to DreamMaker Spas. Specifications and prices are summarized from the maker's public site.