Maker states: "Hand-built in Arizona" and "the same Arizona-built quality as our residential models"
- Power120 V GFCI outlet (maker)
- BaseLevel and solid: concrete, pavers or a framed deck checked for the load
- Warranty: Commercial warranty included
- Standard tub
- 67 x 33 x 27 in, 75 gal (maker)
- X-Large tub
- 73 x 33 x 27 in, 95 gal (maker)
- Chiller
- 1/2 HP (under 10 uses a day) or 1 HP (10 or more a day)
Will it work at your place?
The questions that decide whether this goes smoothly: power, base, space, delivery and permits. Answered here, before you order.
Read: Cold plunge gfci electrical requirements- Electrical work and permit
- Foundation or base
- Assembly labor, unless the maker offers it
What happens after you order.
- STEP 1PlanWe confirm power, base and access with you before you order.
- STEP 2OrderYou order directly from ReGen Total Wellness on their site, and pay them.
- STEP 3ShipsReGen Total Wellness ships to your address in the contiguous US.
- STEP 4AssembleSet it on the prepared base, following the maker's manual.
- STEP 5Fill, power up and plungeYour electrician makes the connection the maker specifies, then you are ready for the first session.
Specifications
| Standard tub | 67 x 33 x 27 in, 75 gal (maker) |
|---|---|
| X-Large tub | 73 x 33 x 27 in, 95 gal (maker) |
| Chiller | 1/2 HP (under 10 uses a day) or 1 HP (10 or more a day) |
| Power | 120 V GFCI outlet (maker) |
| Position | Lay down |
| Warranty | Commercial warranty included |
From ReGen Total Wellness's published product page. Confirm against the current spec sheet before you build a pad or pull wire. Maker's product page
Configurations
| Standard, 1/2 HP chiller | $6,240 |
|---|---|
| Standard, 1 HP chiller | $6,990 |
| X-Large, 1/2 HP chiller | $6,740 |
| X-Large, 1 HP chiller | $7,490 |
About this cold plunge
The Commercial OG is ReGen's simpler commercial plunge, the lay-down OG tub with a heavy-duty chiller and a commercial warranty. It starts at $6,240 at the maker and runs to $7,490 for the X-Large with a 1 HP chiller.
ReGen sizes the chiller by traffic: the 1/2 HP for under ten plunges a day and the 1 HP for ten or more. It needs no special plumbing or electrical.
- From $6,240 at the maker
- Chiller sized to daily use
- Commercial warranty
- Hand-built in Arizona (maker)
Warranty and shipping
Questions people ask before buying
Which chiller do I need?
ReGen recommends the 1/2 HP for fewer than 10 uses a day and the 1 HP for 10 or more.
Where is the chiller made?
ReGen builds its tubs in Arizona and lists the chiller as Japanese built. We quote both so you know what you are buying.
Can I order it through Brevley & Sons?
Not directly yet. Use the maker link for current pricing and lead time, or ask us about sizing, power and placement.
Who do I order from, and who handles warranty?
You order directly from ReGen Total Wellness, and warranty claims go to ReGen Total Wellness. We help you plan before you order and are here if questions come up after.
Get expert help with this cold plunge
Tell us about your space and power, and we will reply with honest advice on sizing, install and whether this is the right model. No obligation.
Not sure this is the one?
Tell us about your space, your power and your weather. We'll tell you plainly whether this fits, and what would fit better if it doesn't.
Product names and trademarks belong to ReGen Total Wellness. Specifications and prices are summarized from the maker's public site.