Maker states: "Hand-built in Arizona" and "ReGen builds premium USA-made cold plunge systems"
- Power120 V, 13.5 A max draw, GFCI outlet (maker)
- Space84 x 42 x 31 in, 125 gal (maker)
- BaseLevel and solid: concrete, pavers or a framed deck checked for the load
- Size
- 84 x 42 x 31 in, 125 gal (maker)
- Fits
- 6 ft 8 in and taller (maker)
- Chiller
- 1 HP, down to 36 F, Japanese built (maker)
Will it work at your place?
The questions that decide whether this goes smoothly: power, base, space, delivery and permits. Answered here, before you order.
Read: Cold plunge gfci electrical requirements- Electrical work and permit
- Foundation or base
- Assembly labor, unless the maker offers it
What happens after you order.
- STEP 1PlanWe confirm power, base and access with you before you order.
- STEP 2OrderYou order directly from ReGen Total Wellness on their site, and pay them.
- STEP 3ShipsReGen Total Wellness ships to your address in the contiguous US.
- STEP 4AssembleSet it on the prepared base, following the maker's manual.
- STEP 5Fill, power up and plungeYour electrician makes the connection the maker specifies, then you are ready for the first session.
Specifications
| Size | 84 x 42 x 31 in, 125 gal (maker) |
|---|---|
| Fits | 6 ft 8 in and taller (maker) |
| Chiller | 1 HP, down to 36 F, Japanese built (maker) |
| Circulation | High-flow, dual speed; 50 sq ft filter cartridge |
| Power | 120 V, 13.5 A max draw, GFCI outlet (maker) |
| Dry weight | 425 lb (maker) |
| Position | Upright seat, hybrid of vertical and lay down |
| Water care | Ozone, commercial filtration, skimmer with hair catch, chlorine or bromine tab feeder |
| Certifications | NSF50 filter, UL compressor, certified suction (maker) |
From ReGen Total Wellness's published product page. Confirm against the current spec sheet before you build a pad or pull wire. Maker's product page
Configurations
| Standard skirt, 2 year warranty | $9,490 |
|---|---|
| With custom skirt wrap | $11,490 |
About this cold plunge
The Commercial Blast is ReGen's high-traffic plunge for gyms and recovery studios, built on the 125 gallon Blast with a 1 HP chiller. It sells for $9,490 at the maker, or $11,490 with a custom branded skirt wrap.
It adds a skimmer with a hair catch and an automatic tab feeder to cut daily water work, with an NSF50 filter and a UL listed compressor.
- From $9,490 at the maker
- Built for high traffic
- Tab feeder and skimmer
- USA-made, Arizona (maker)
Questions people ask before buying
What does the custom wrap add?
ReGen charges $2,000 for a custom skirt wrap, including design and installation, so the tub can carry your gym's branding.
Where is the chiller made?
ReGen builds its tubs in Arizona and lists the chiller as Japanese built. We quote both so you know what you are buying.
Can I order it through Brevley & Sons?
Not directly yet. Use the maker link for current pricing and lead time, or ask us about sizing, power and placement.
Who do I order from, and who handles warranty?
You order directly from ReGen Total Wellness, and warranty claims go to ReGen Total Wellness. We help you plan before you order and are here if questions come up after.
Get expert help with this cold plunge
Tell us about your space and power, and we will reply with honest advice on sizing, install and whether this is the right model. No obligation.
Not sure this is the one?
Tell us about your space, your power and your weather. We'll tell you plainly whether this fits, and what would fit better if it doesn't.
Product names and trademarks belong to ReGen Total Wellness. Specifications and prices are summarized from the maker's public site.