Photos: Icebound Essentials. See Icebound Essentials's product page for more.

The Endeavor XL Plunge and Chiller Bundle

Name: Icebound Essentials The Endeavor XL Plunge and Chiller Bundle
Brand: Icebound Essentials

Cold plunge

$1,899

Maker's listed price, checked October 25, 2026. Taxes and freight are set by the maker.

Range $1,899 to $2,700 across 2 configurations.

Configuration

Buy from Icebound Essentials ↗ Talk to us before you buy

You order directly from Icebound Essentials; Brevley & Sons does not stock or ship this item. We help you plan it before and after. How we work.

Some links on our site are affiliate links and may earn us a commission. Read our disclosure.

Will it work at your place?

Space72 x 32 x 25 in (maker)
BaseLevel and solid: concrete, pavers or a framed deck checked for the load

See the full install checklist

Dimensions: 72 x 32 x 25 in (maker)
Capacity: 150 gal, about 900 lb filled
Ports: Two 1/2 in universal chiller ports

Before you buy

Will it work at your place?

The questions that decide whether this goes smoothly: power, base, space, delivery and permits. Answered here, before you order.

Read: Cold plunge gfci electrical requirements

Space

72 x 32 x 25 in (maker). Keep the clearances in the maker's manual.

Base

A level, solid base: a concrete pad, pavers, or a framed deck checked for the load.

Permits

Some cities and HOAs regulate burning and backyard structures. Check with yours first.

Install notes

Icebound's chillers use a GFCI protected plug. Run them from a grounded outdoor rated outlet and keep the plug and cord off wet ground.

A filled tub weighs around 850 to 900 pounds, so check deck loads and use a level surface.

Not included. Plan for these.

Foundation or base
Assembly labor, unless the maker offers it

From order to first use

What happens after you order.

STEP 1
Plan
We confirm power, base and access with you before you order.
STEP 2
Order
You order directly from Icebound Essentials on their site, and pay them.
STEP 3
Ships
Icebound Essentials ships to your address in the contiguous US.
STEP 4
Assemble
Set it on the prepared base, following the maker's manual.
STEP 5
Fire it up
Check local burn rules and clearances, then enjoy the first evening.

Specifications

Dimensions	72 x 32 x 25 in (maker)
Capacity	150 gal, about 900 lb filled
Ports	Two 1/2 in universal chiller ports
Chiller range	37 to 107.6 F
Chiller features	Wi-Fi, ozone, 5 micron filter

From Icebound Essentials's published product page. Confirm against the current spec sheet before you build a pad or pull wire. Maker's product page

Configurations

Tub and 0.5HP EcoPro chiller	$1,899
Tub and 1HP Pro chiller	$2,700

About this cold plunge

This bundle pairs Icebound's 72 inch Endeavor XL tub with a chiller and heater. It sells for $1,899 at the maker with the 0.5 HP EcoPro or $2,699.99 with the 1 HP Pro.

It is the lowest priced chilled setup in Icebound's line and the longest tub, a good fit for tall plungers on a budget.

From $1,899 at the maker
72 in long tub
Chiller included
37 to 107.6 F

Returns

Returns follow Icebound Essentials's policy, since you order from them. How returns work.

Questions people ask before buying

Can I upgrade the chiller later?

Yes. Any chiller with standard 1/2 inch fittings connects to the tub's ports, including the Icebound Pro.

Where are Icebound plunges made?

Icebound is based in Austin, Texas. Its plunge and chiller pages do not say where those products are made, so we list no origin for them.

Can I order it through Brevley & Sons?

Not directly yet. Use the maker link for current pricing and lead time, or ask us about sizing, fuel and placement.

Who do I order from, and who handles warranty?

You order directly from Icebound Essentials, and warranty claims go to Icebound Essentials. We help you plan before you order and are here if questions come up after.

Field guides