Maker states: "Family-owned and operated, designed and assembled in-house"
- Power120V 15 amp GFCI outlet; 5.8 amps while chilling
- Space27.5 in W x 56 in L x 40 in H
- BaseLevel and solid: concrete, pavers or a framed deck checked for the load
- Warranty: 5 years on the tub; all-in-one unit 2 years residential (maker)
- Interior
- 24.5 in W x 29 in L x 38.5 in H (maker)
- Fits
- Up to 6 ft 3 in and 220 lb comfortably (maker)
- Fill
- 48 gallons recommended, 75 max
Will it work at your place?
The questions that decide whether this goes smoothly: power, base, space, delivery and permits. Answered here, before you order.
Read: Best cold plunges 2026- Electrical work and permit
- Foundation or base
- Assembly labor, unless the maker offers it
What happens after you order.
- STEP 1PlanWe confirm power, base and access with you before you order.
- STEP 2OrderYou order directly from Cold Creek Tubs on their site, and pay them.
- STEP 3ShipsCold Creek Tubs ships to your address in the contiguous US.
- STEP 4AssembleSet it on the prepared base, following the maker's manual.
- STEP 5Fill, power up and plungeYour electrician makes the connection the maker specifies, then you are ready for the first session.
Specifications
| Interior | 24.5 in W x 29 in L x 38.5 in H (maker) |
|---|---|
| Fits | Up to 6 ft 3 in and 220 lb comfortably (maker) |
| Fill | 48 gallons recommended, 75 max |
| Full setup power | 120V 15 amp GFCI outlet; 5.8 amps while chilling |
| Full setup exterior | 27.5 in W x 56 in L x 40 in H |
| Chiller | 1/2 HP all-in-one unit with ozone and 5 in filter |
| Warranty | 5 years on the tub; all-in-one unit 2 years residential (maker) |
From Cold Creek Tubs's published product page. Confirm against the current spec sheet before you build a pad or pull wire. Maker's product page
Configurations
| Tub only with step (ice) | $1,299 |
|---|---|
| Full setup with chiller unit | $3,249 |
About this cold plunge
The Vertical Cold Tub is a compact, upright plunge with a built-in seat step, from Cold Creek. It sells for $1,299 at the maker as a tub only setup for ice, or $3,249 as a full setup with the all-in-one cooling and filtration unit hidden in the step.
The full setup's 1/2 HP chiller runs from a standard 120 volt GFCI outlet and draws 5.8 amps while chilling. The tub fits users up to about 6 foot 3 inches and 220 pounds, and its footprint is under 5 feet long.
- From $1,299 at the maker
- Small upright footprint
- Ice or 1/2 HP chiller
- Designed and assembled in-house (maker)
Warranty and shipping
Questions people ask before buying
Tub only or full setup?
The tub only version is for ice and needs no outlet. The full setup adds the chiller, pump, filter and ozone unit inside the step so the water stays cold without ice.
Who builds Cold Creek tubs?
Cold Creek says its tubs are designed and assembled in-house by a family owned business based in Fontana, California. We quote that wording and show no Made in USA badge.
Can I order it through Brevley & Sons?
Not directly yet. Use the maker link for current pricing and lead time, or ask us about sizing, power and placement.
Who do I order from, and who handles warranty?
You order directly from Cold Creek Tubs, and warranty claims go to Cold Creek Tubs. We help you plan before you order and are here if questions come up after.
Get expert help with this cold plunge
Tell us about your space and power, and we will reply with honest advice on sizing, install and whether this is the right model. No obligation.
Not sure this is the one?
Tell us about your space, your power and your weather. We'll tell you plainly whether this fits, and what would fit better if it doesn't.
Product names and trademarks belong to Cold Creek Tubs. Specifications and prices are summarized from the maker's public site.