Origin: maker states "Made in the USA" or "Assembled in the USA" (Summit to Sea FAQ); no per-model proof
- PowerStandard 120V 15 amp outlet
- Space40" diameter x 85" tall
- BaseA level indoor floor in a cool room, with clearance to get in and out
- Seats
- Up to 1 people
- Pressure
- 1.3 ATA (maker range up to 4.4 psi)
- Size
- 40" diameter x 85" tall
Will it work at your place?
The questions that decide whether this goes smoothly: power, base, space, delivery and permits. Answered here, before you order.
Read: Soft vs hard home hyperbaric chamber guide- Electrical work and permit
- Foundation or base
- Assembly labor, unless the maker offers it
What happens after you order.
- STEP 1PlanWe confirm power, base and access with you before you order.
- STEP 2OrderYou order directly from Summit to Sea on their site, and pay them.
- STEP 3ShipsSummit to Sea ships to your address in the contiguous US.
- STEP 4AssembleSet it on the prepared base, following the maker's manual.
- STEP 5Inflate, check the seals and startYour electrician makes the connection the maker specifies, then you are ready for the first session.
Specifications
| Pressure | 1.3 ATA (maker range up to 4.4 psi) |
|---|---|
| Size | 40" diameter x 85" tall |
| Compressors | 2 redundant |
| Power | Standard 120V 15 amp outlet |
| Entry | 5 ft full-length double sided zipper |
| Patent | US 9,622,931 |
From Summit to Sea's published product page. Confirm against the current spec sheet before you pick a room. Maker's product page
About this home hyperbaric chamber
The Dive Vertical is an upright chamber sized for a chair: 40 inches across and 85 inches tall, with a five foot zipper opening.
Summit to Sea says it was the first vertical portable mild hyperbaric chamber on the market. It has an internal frame for faster inflation, an integrated stabilizer, antibacterial carpet and two redundant compressors on a standard 120V 15 amp outlet. Listed from $13,995.
- Sit upright in a chair
- 40" x 85" tall
- Internal frame
- 120V 15A outlet
Questions people ask before buying
Where are Summit to Sea chambers made?
Summit to Sea states its models are "Made in the USA" or "Assembled in the USA" using materials from partners in Europe and the United States. It does not say which applies to each model, so we show no Made in USA badge.
Is this chamber FDA cleared?
Summit to Sea says it is the manufacturer and FDA 510(k) holder (K072757) for its chambers. Mild 1.3 ATA chambers are FDA cleared for the treatment of acute mountain sickness; we make no other health claims, so talk with your doctor about whether a chamber is right for you.
Can I order it through Brevley & Sons?
Not directly yet. Summit to Sea sells through authorized distributors. Use the maker link for current pricing, or ask us about sizing, power and placement.
Who do I order from, and who handles warranty?
You order directly from Summit to Sea, and warranty claims go to Summit to Sea. We help you plan before you order and are here if questions come up after.
Compare with similar home hyperbaric chambers
See all home hyperbaric chambers
Get expert help with this seated soft chamber
Tell us about your space and power, and we will reply with honest advice on sizing, install and whether this is the right model. No obligation.
Not sure this is the one?
Tell us about your space, your power and your weather. We'll tell you plainly whether this fits, and what would fit better if it doesn't.
Product names and trademarks belong to Summit to Sea. Specifications and prices are summarized from the maker's public site.