Origin: maker states 100% American built, Pocomoke City, Maryland (Newtowne site); written proof pending
- PowerStandard 120V household outlet
- BaseA level indoor floor in a cool room, with clearance to get in and out
- Delivery: Included
- Warranty: 2 years
- Seats
- Up to 1 people
- Pressure
- 4 psi, 1.3 ATA
- Size at pressure
- 81" long x 37" wide x 42" tall
Will it work at your place?
The questions that decide whether this goes smoothly: power, base, space, delivery and permits. Answered here, before you order.
Read: Soft vs hard home hyperbaric chamber guide- Electrical work and permit
- Foundation or base
- Assembly labor, unless the maker offers it
What happens after you order.
- STEP 1PlanWe confirm power, base and access with you before you order.
- STEP 2OrderYou order directly from Newtowne Hyperbarics on their site, and pay them.
- STEP 3ShipsNewtowne Hyperbarics ships to your address in the contiguous US.
- STEP 4AssembleSet it on the prepared base, following the maker's manual.
- STEP 5Inflate, check the seals and startYour electrician makes the connection the maker specifies, then you are ready for the first session.
Specifications
| Pressure | 4 psi, 1.3 ATA |
|---|---|
| Size at pressure | 81" long x 37" wide x 42" tall |
| Frame | 68" x 27.75" x 42" high at head end |
| Compressor | 80L |
| Power | Standard 120V household outlet |
| Included | 2 viewports, 2 accessory valve ports; no chair or mat |
| Shipping | Included |
| Warranty | 2 years |
From Newtowne Hyperbarics's published product page. Confirm against the current spec sheet before you pick a room. Maker's product page
About this home hyperbaric chamber
The Long Shoe has the Shoe's width with extra length, and Newtowne says users up to 6 ft 1 in can sit up or lie down.
It runs at 4 psi, about 1.3 ATA. Newtowne lists it on sale at $5,495 through November 30, 2026, with shipping included.
- Sit or lie down
- 81" x 37" x 42"
- Users up to 6 ft 1 in
- Shipping included
Warranty and shipping
Questions people ask before buying
Where are Newtowne chambers made?
Newtowne Hyperbarics says its chambers are 100% American built at its factory in Pocomoke City, Maryland. We have not yet received written per-model origin proof from Newtowne, so we show no Made in USA badge for now.
Do I need a prescription?
Newtowne lists its chambers as FDA cleared Class II devices and says a prescription is required to buy one. Mild 1.3 ATA chambers are FDA cleared for the treatment of acute mountain sickness; we make no other health claims, so talk with your doctor first.
Can I order it through Brevley & Sons?
Not directly yet. Use the maker link for current pricing and lead time, or ask us about sizing, power and placement.
Who do I order from, and who handles warranty?
You order directly from Newtowne Hyperbarics, and warranty claims go to Newtowne Hyperbarics. We help you plan before you order and are here if questions come up after.
Compare with similar home hyperbaric chambers
See all home hyperbaric chambers
Get expert help with this seated soft chamber
Tell us about your space and power, and we will reply with honest advice on sizing, install and whether this is the right model. No obligation.
Not sure this is the one?
Tell us about your space, your power and your weather. We'll tell you plainly whether this fits, and what would fit better if it doesn't.
Product names and trademarks belong to Newtowne Hyperbarics. Specifications and prices are summarized from the maker's public site.