- PowerDedicated 120V 15A circuit; keep 5 ft from the outlet
- Space31 in L x 17 in W x 19 in H
- BaseLevel and solid: concrete, pavers or a framed deck checked for the load
- Dimensions
- 31 in L x 17 in W x 19 in H
- Type
- Standalone chiller
- Power
- Dedicated 120V 15A circuit; keep 5 ft from the outlet
Will it work at your place?
The questions that decide whether this goes smoothly: power, base, space, delivery and permits. Answered here, before you order.
Read: Cold plunge gfci electrical requirements- Electrical work and permit
- Foundation or base
- Assembly labor, unless the maker offers it
What happens after you order.
- STEP 1PlanWe confirm power, base and access with you before you order.
- STEP 2OrderYou order directly from Plunge on their site, and pay them.
- STEP 3ShipsPlunge ships to your address in the contiguous US.
- STEP 4AssembleSet it on the prepared base, following the maker's manual.
- STEP 5Fill, power up and plungeYour electrician makes the connection the maker specifies, then you are ready for the first session.
Specifications
| Dimensions | 31 in L x 17 in W x 19 in H |
|---|---|
| Type | Standalone chiller |
| Power | Dedicated 120V 15A circuit; keep 5 ft from the outlet |
| Cooling | 0.75 HP, 12.5°F per hour, holds 37°F in 120°F ambient |
| Weight | 106 lb |
| Filter | 8 x 4 in, 20 micron |
From Plunge's published product page. Confirm against the current spec sheet before you build a pad or pull wire. Maker's product page
Configurations
| Cold Only / No Connections | $3,990 |
|---|---|
| Cold Only / The Plunge | $3,990 |
| Cold Only / Plunge Pod | $3,990 |
| Cold Only / Plunge Air | $3,990 |
| Cold Only / Plunge Pop-Up | $3,990 |
| Add Heater / No Connections | $4,490 |
| Add Heater / The Plunge | $4,490 |
| Add Heater / Plunge Pod | $4,490 |
About this cold plunge
The Plunge Plunge Pro Chiller is a cold plunge chiller listed at $3,990 to $4,490 on the maker's site, checked October 24, 2026. The Pro Chiller is Plunge's stronger standalone chiller, an upgrade for Plunge tubs in hot climates or heavy use.
The maker warns that connecting it to non-Plunge tubs voids the warranty.
- 0.75 HP
- 12.5°F per hour
- Holds 37°F in 120°F heat
- Plunge tubs only
Questions people ask before buying
What outlet does it need?
Plunge lists: Dedicated 120V 15A circuit; keep 5 ft from the outlet. A dedicated circuit means nothing else runs on it.
Where is Plunge made?
Plunge's product pages say its traditional cedar saunas are handcrafted in the USA. Its cold plunge pages do not state a country of origin, so we do not list one for them.
Can I order it through Brevley & Sons?
Not directly. The button takes you to the maker, who sells and ships it. We help with sizing, power and placement questions at no charge.
Who do I order from, and who handles warranty?
You order directly from Plunge, and warranty claims go to Plunge. We help you plan before you order and are here if questions come up after.
Get expert help with this cold plunge chiller
Tell us about your space and power, and we will reply with honest advice on sizing, install and whether this is the right model. No obligation.
Not sure this is the one?
Tell us about your space, your power and your weather. We'll tell you plainly whether this fits, and what would fit better if it doesn't.
Product names and trademarks belong to Plunge. Specifications and prices are summarized from the maker's public site.