
Built in Knoxville, Tennessee
- Power110-120V
- BaseLevel and solid: concrete, pavers or a framed deck checked for the load
- Voltage
- 110-120V
- Current draw
- 3.9A
- Power draw
- 450W
Will it work at your place?
The questions that decide whether this goes smoothly: power, base, space, delivery and permits. Answered here, before you order.
Read: Cold plunge gfci electrical requirements- Electrical work and permit
- Foundation or base
- Assembly labor, unless the maker offers it
What happens after you order.
- STEP 1PlanWe confirm power, base and access with you before you order.
- STEP 2OrderYou order directly from Penguin Chillers on their site, and pay them.
- STEP 3ShipsPenguin Chillers ships to your address in the contiguous US.
- STEP 4AssembleSet it on the prepared base, following the maker's manual.
- STEP 5Fill, power up and plungeYour electrician makes the connection the maker specifies, then you are ready for the first session.
Specifications
| Voltage | 110-120V |
|---|---|
| Current draw | 3.9A |
| Power draw | 450W |
| Length | 15 in |
| Width | 17 in |
| Height | 13 in |
From Penguin Chillers's published product page. Confirm against the current spec sheet before you build a pad or pull wire. Maker's product page
Configurations
| Standard warranty / No (Chiller Only) | $1,950 |
|---|---|
| Standard warranty / Yes (Chiller + Install & Filter Kit) | $2,100 |
| 2 Yr Warranty / No (Chiller Only) | $2,135 |
| 2 Yr Warranty / Yes (Chiller + Install & Filter Kit) | $2,300 |
| 3 Yr Warranty / No (Chiller Only) | $2,235 |
| 3 Yr Warranty / Yes (Chiller + Install & Filter Kit) | $2,405 |
About this cold plunge
The Penguin Chillers Cold Therapy Chiller is a standalone chiller for building or upgrading a cold plunge. It is priced from $1,950 to $2,405 at the maker, depending on options.
A standalone chiller makes sense when you already own a tub, a stock tank or a barrel and want reliable cold without ice. Bigger chillers recover faster after each plunge and cope better with hot garages and summer sun.
- Power draw: 450W
- Current draw: 3.9A
- Built in Knoxville, Tennessee
Questions people ask before buying
Does it plug into a normal outlet?
The maker lists power as 110-120V. Use a dedicated GFCI outlet where possible and confirm the exact requirement in the manual.
How cold will it get?
Real results depend on room temperature, lid use and how often you plunge.
Can I order it through Brevley & Sons?
Not directly yet. Use the maker link for current pricing and lead time, or ask us to help size a system for your space and climate.
Who do I order from, and who handles warranty?
You order directly from Penguin Chillers, and warranty claims go to Penguin Chillers. We help you plan before you order and are here if questions come up after.
Compare with similar cold plunges
See all cold plungesGet expert help with this cold plunge chiller
Tell us about your space and power, and we will reply with honest advice on sizing, install and whether this is the right model. No obligation.
Not sure this is the one?
Tell us about your space, your power and your weather. We'll tell you plainly whether this fits, and what would fit better if it doesn't.
Product names and trademarks belong to Penguin Chillers. Specifications and prices are summarized from the maker's public site.

