- Power120 V, 15 A
- Space84 x 42 x 30 in (maker)
- BaseLevel and solid: concrete, pavers or a framed deck checked for the load
- Dimensions
- 84 x 42 x 30 in (maker)
- Capacity
- 116 gal
- Weight
- 346 lb dry, 1,315 lb filled (maker)
Will it work at your place?
The questions that decide whether this goes smoothly: power, base, space, delivery and permits. Answered here, before you order.
Read: Cold plunge gfci electrical requirements- Electrical work and permit
- Foundation or base
- Assembly labor, unless the maker offers it
What happens after you order.
- STEP 1PlanWe confirm power, base and access with you before you order.
- STEP 2OrderYou order directly from Icebound Essentials on their site, and pay them.
- STEP 3ShipsIcebound Essentials ships to your address in the contiguous US.
- STEP 4AssembleSet it on the prepared base, following the maker's manual.
- STEP 5Fill, power up and plungeYour electrician makes the connection the maker specifies, then you are ready for the first session.
Specifications
| Dimensions | 84 x 42 x 30 in (maker) |
|---|---|
| Capacity | 116 gal |
| Weight | 346 lb dry, 1,315 lb filled (maker) |
| Temperature | 40 to 104 F |
| Power | 120 V, 15 A |
| Sanitation | Ozone |
| Noise | 45 dB or less (maker) |
From Icebound Essentials's published product page. Confirm against the current spec sheet before you build a pad or pull wire. Maker's product page
Configurations
| Standard | $7,499 |
|---|---|
| Wi-Fi enabled | $7,999 |
About this cold plunge
The Resolute Pro is Icebound's self contained cold plunge, with the chiller and heater built into a matte black cabinet. It sells for $7,499 at the maker, or $7,999 with Wi-Fi.
It holds 116 gallons, cools to 40 F or heats to 104 F, and runs on a 120 volt 15 amp circuit. It ships crated and assembled by freight to your driveway or door.
- From $7,499 at the maker
- Chiller built in
- 40 to 104 F
- 120 V plug-in
Questions people ask before buying
Will it fit through my gate?
Icebound says the crated unit weighs 400+ pounds; the tub is 84 by 42 by 30 inches, so measure doorways and gates before delivery.
Where are Icebound plunges made?
Icebound is based in Austin, Texas. Its plunge and chiller pages do not say where those products are made, so we list no origin for them.
Can I order it through Brevley & Sons?
Not directly yet. Use the maker link for current pricing and lead time, or ask us about sizing, fuel and placement.
Who do I order from, and who handles warranty?
You order directly from Icebound Essentials, and warranty claims go to Icebound Essentials. We help you plan before you order and are here if questions come up after.
Get expert help with this cold plunge
Tell us about your space and power, and we will reply with honest advice on sizing, install and whether this is the right model. No obligation.
Not sure this is the one?
Tell us about your space, your power and your weather. We'll tell you plainly whether this fits, and what would fit better if it doesn't.
Product names and trademarks belong to Icebound Essentials. Specifications and prices are summarized from the maker's public site.